Key Features
- Original Replacement Coils : Spares coils designed specifically for the Kanger ProTank line (ProTank, ProTank 2, ProTank 3), classic pre-sub-ohm hardware built for basic variable-voltage batteries rather than wattage-mode mods.
- Six Resistance Options : Available in 1.5Ω, 1.8Ω, 2.2Ω, 2.2Ω SOCC, 2.5Ω, and 2.5Ω SOCC — all standard mouth-to-lung (MTL) builds.
- SOCC Option : Stainless-steel Organic Cotton Coil version uses a stainless-steel housing with organic cotton wicking, offering improved wicking compared to the earlier silica-wick design.
- Kanthal Heating Element : Standard versions feature Kanthal wire with organic cotton wicking.
- Voltage Design : The ProTank predates variable-wattage mods and was designed to run off a simple variable-voltage battery, typically in the 3.3–4.2V range depending on resistance.
- Wattage-Mode Compatible : Can be used with modern wattage-mode mods — start around 6–10W and adjust in small steps; these coils were not designed for wattage mode.
- Same Coil Deck Across Models : Kanger kept the same coil deck across the ProTank, ProTank 2, and ProTank 3, making these coils universally compatible within the lineup.
- EVOD Tank Compatibility : The same screw-in coil head also fits the Kanger EVOD tank.
Technical Specifications
Coil Specifications
| Parameter | Detail |
|---|---|
| Resistance Options | 1.5Ω, 1.8Ω, 2.2Ω, 2.2Ω SOCC, 2.5Ω, 2.5Ω SOCC |
| Heating Element | Kanthal (standard) / Stainless steel (SOCC versions) |
| Wicking Material | Organic cotton |
| Build Type | MTL (Mouth-to-Lung) |
| Installation | Screw-in |
| Wattage Range | Not published by Kanger — recommended starting point 6–10W for wattage-mode mods |
| Voltage Range | Typically 3.3–4.2V depending on resistance |
| Pack Options | Single or 5 Pack |
Package Contents
- 1 x Kanger ProTank Coil (single pack)
- 5 x Kanger ProTank Coils (5 pack)
Compatible With
Kanger ProTank, ProTank 2, ProTank 3, and Kanger EVOD tank.
