Key Features
- Evolv DNA 250C Chipset: Features accurate temperature control, Watts Boost, Replay Mode, and Preheat function
- Wide Output Modes: Supports VW, VV, TC, TCR, and Bypass modes with a maximum output of 400W
- Changeable Built-in Li-Po Battery: 1600mAh 4s Li-Po battery with long cycle life, low internal resistance, stable discharge characteristics, high voltage, good safety performance, and no memory effect
- USB Charging and Firmware Upgrading: Built-in onboard charger with fast charging, pass-through, on-the-go USB, and firmware upgrade support
- Multiple Protections: Atomizer, low resistance, short circuit, overheat, low voltage step-down, and onboard reverse polarity protection
- 0.9" Full-Color TFT Display: Displays detailed data on a 0.9" (80x160 pixel) screen
- Compact Zinc Alloy Design: Combines simple elegance with high practicality
- Escribe Software Support: Detailed device configuration through free Escribe software
- Standardized 510 Connection: Compatible with nearly all current atomizers
Technical Specifications
Mod Specifications
| Parameter | Detail |
|---|---|
| Dimensions | 59 x 36.66 x 116.1mm |
| Weight | 416.9g |
| Battery | Li-Po 1600mAh (4s) (included) |
| Input Voltage | 6.0V-16.8V |
| Battery Voltage | 12V-16.8V (3.0V-4.2V, 4s) |
| Output Voltage | 0.2V-16.8V |
| Power Range | 1-400W |
| Current Range | 0.5A-30A |
| Max Charging Current | 3A (2A suggested) |
| Temperature Range | 200°F-600°F |
| Supported Coil Materials | Nickel, Titanium, SS460, SS316, KA1, Ni80, Ni90 |
| Display | 0.9" (80x160 pixel) Full-Color TFT |
| Body Material | Zinc Alloy |
| Colors Available | Silver, Gunmetal, Black |
Package Contents
- 1 X Hadron Pro DNA 250C Box Mod (with 1600mAh 4s Li-Po pack pre-installed)
- 1 X USB Connecting cable
- 1 X User Manual
